Products
Contact Us
Service Hotline
Telephone:13932359348
Fax: 0313-3687997
Website:www.zlphj.com(Chinese)
en.zlphj.com(English)
Address: 100 m east of Xuanhua District Expressway Exit, Zhangjiakou City
Horizontal double-sided automatic de-balancing machine
Key words:
Classification:
- Product Description
- Scope of application
- Technical parameters
- Product Video
- File Download
-
- Commodity name: Horizontal double-sided automatic de-balancing machine
The drive motor presses the rotor through a flat belt, and the belt is placed in the middle of the rotor. The balancing machine is equipped with a drilling and weight removal device, which is controlled by PLC. The beam moves 800mm left and right, the drill bit is located directly above the workpiece, and the diameter of the drill bit is 20mm; After the balancing machine is detected, the punching position will automatically stop directly above, and the punching and weight removal will be carried out on the two measuring surfaces respectively.
•The drive motor presses the rotor through a flat belt, and the belt is placed in the middle of the rotor.
•The balancing machine is additionally equipped with a drilling and weight removal device, controlled by PLC, the beam moves 800mm left and right, the drill bit is located directly above the workpiece, and the diameter of the drill bit is 20mm.
•After the balancing machine is tested, the punching position will automatically stop directly above, and the punching will be carried out on the two measuring surfaces respectively to remove weight.
•Calculation of drilling depth after selection of drill bit diameter and material density
•Configure a printer to print the test results (A4 paper)
•Configure an industrial vacuum cleaner to collect iron pins from the drilling place in time to keep the machine clean.
-
Scope of application
-
Workpiece quality range
kg
5-160
Maximum outside diameter of workpiece
mm
Φ1000
Max. diameter at drive frame
mm
Φ300
Workpiece journal range
mm
φ10 ~ φ180
Range of distance between two supports
mm
80-1000
Balance speed range
r/min
300-5000
Motor power (servo motor)
kw
3.0
Transmission form
Optional
Leather drag
Measuring plane number: single/double switchable; weighting/de-weighting switchable
Electric measuring system/control cabinet: ZL210 intelligent system/vertical control cabinet
According to the specific parameters of the rotor: diameter, weight, working speed and balance accuracy, calculate the weight on the left and right correction surfaces.
Main technical performance accuracy index
Minimum attainable residual unbalance
g.mm/kg
≤ 0.5
Unbalance reduction rate
URR
95%
•The drive motor presses the rotor through a flat belt, and the belt is placed in the middle of the rotor.
•The balancing machine is additionally equipped with a drilling and weight removal device, controlled by PLC, the beam moves 800mm left and right, the drill bit is located directly above the workpiece, and the diameter of the drill bit is 20mm.
•After the balancing machine is tested, the punching position will automatically stop directly above, and the punching will be carried out on the two measuring surfaces respectively to remove weight.
•Calculation of drilling depth after selection of drill bit diameter and material density
•Configure a printer to print the test results (A4 paper)
•Configure an industrial vacuum cleaner to collect iron pins from the drilling place in time to keep the machine clean.
Previous Page
Previous Page
Next Page
Online Inquiry
Related Products