Products
Contact Us
Service Hotline
Telephone:13932359348
Fax: 0313-3687997
Website:www.zlphj.com(Chinese)
en.zlphj.com(English)
Address: 100 m east of Xuanhua District Expressway Exit, Zhangjiakou City
Vertical automatic balancing machine
Key words:
Classification:
- Product Description
- Scope of application
- Technical parameters
- Product Video
- File Download
-
- Commodity name: Vertical automatic balancing machine
The ZLAS-1 is a single-sided vertical full-automatic de-balancing machine that achieves workpiece balance correction by de-weighing according to the customer's workpiece design requirements. Products are divided into drilling, milling and turning according to the weight removal method (turning products are introduced separately); Single station is to complete measurement, correction and re-inspection on one station, with high one-time weight removal rate. The upper and lower workpieces are completed manually. The weight removal is on an independent station, and the dynamic balance efficiency of the equipment is 70% higher than that of manual weight removal. The product is suitable for leveling and automatic calibration of disc parts such as brake discs, pulleys, brake hubs, clutches, flywheels, etc.
The ZLAS-1 is a single-sided vertical full-automatic de-balancing machine that achieves workpiece balance correction by de-weighing according to the customer's workpiece design requirements. Products are divided into drilling, milling and turning according to the weight removal method (turning products are introduced separately); Single station is to complete measurement, correction and re-inspection on one station, with high one-time weight removal rate. The upper and lower workpieces are completed manually. The weight removal is on an independent station, and the dynamic balance efficiency of the equipment is 70% higher than that of manual weight removal. The product is suitable for leveling and automatic calibration of disc parts such as brake discs, pulleys, brake hubs, clutches, flywheels, etc. This series of products generally need to be customized according to customer requirements. We will provide fully automatic products that meet the customer's specified workpiece balance needs and have higher parameter reserves.
-
Used in pulley, clutch pressure plate, water pump impeller, fan blades and other disc parts dynamic balance.
-
Model YLDZD-40 Workpiece quality 20kg Maximum diameter of workpiece 36cm Reachable residual unbalance (eMar) 1mg Unbalance Reduction Rate (URR) ≥ 90% Way to go heavy Flat drill bit, standard drill bit Balancing machine type Hard support measuring swing frame Balance speed (RPM) 300-800 Working power supply TN-S(50Hz) Air pressure 0.4-0.6MP Gas consumption 6L/min Maximum rotor thickness 350mm Type of protection Phase loss, overload, air pressure Industrial Vacuum Cleaner automatic slag absorption
The ZLAS-1 is a single-sided vertical full-automatic de-balancing machine that achieves workpiece balance correction by de-weighing according to the customer's workpiece design requirements. Products are divided into drilling, milling and turning according to the weight removal method (turning products are introduced separately); Single station is to complete measurement, correction and re-inspection on one station, with high one-time weight removal rate. The upper and lower workpieces are completed manually. The weight removal is on an independent station, and the dynamic balance efficiency of the equipment is 70% higher than that of manual weight removal. The product is suitable for leveling and automatic calibration of disc parts such as brake discs, pulleys, brake hubs, clutches, flywheels, etc. This series of products generally need to be customized according to customer requirements. We will provide fully automatic products that meet the customer's specified workpiece balance needs and have higher parameter reserves.
Previous Page
Previous Page
Online Inquiry
Related Products