undefined
undefined
+
  • undefined
  • undefined

MLD-10 type dynamic load abrasive wear tester

The testing machine is a multi-functional testing machine that can simulate a variety of working conditions. Can be used for a variety of metal materials and a variety of dry (wet) abrasive, in the impact load type or no impact load, contact or no contact, lubrication or rolling friction under the wear resistance test of metal materials. Technical parameters: hammer mass 10kg impact power 0-5 joule hammer free fall height 0-50mm impact times 50.100.150.200 times/min abrasive flow 0-50kg/h sample round: ¢ 11.28 × 40mm square: 1

Key words:

MLD-10 type dynamic load abrasive wear tester

  • Product Description
  • Scope of application
  • Technical parameters
  • Product Video
  • File Download
    • Commodity name: MLD-10 type dynamic load abrasive wear tester

    The testing machine is a multi-functional testing machine that can simulate a variety of working conditions. Can be used for a variety of metal materials and a variety of dry (wet) abrasive, in the impact load type or no impact load, contact or no contact, lubrication or rolling friction under the wear resistance test of metal materials. Technical parameters: hammer mass 10kg impact power 0-5 joule hammer free fall height 0-50mm impact times 50.100.150.200 times/min abrasive flow 0-50kg/h sample round: ¢ 11.28 × 40mm square: 1

    This testing machine is a testing machine with multi-function and can simulate various working conditions. It can be used for the wear resistance test of metal materials and various dry and (wet) abrasives under impact load or no impact load, contact or no contact, sliding or rolling friction. Through the test, it can be quantitatively measured. The wear caused by different loads and different interactions of metal materials and the wear mechanism can be tested and studied. This testing machine can be used for scientific research institutions such as metallurgy, mining, cement, building materials, transportation, electric power, construction machinery, agricultural machinery, colleges and universities and design departments to study the wear and wear mechanism of metal materials, reasonably select metal materials, and at the same time It can also meet the needs of laboratory production inspection in machinery manufacturing plants, metallurgical repair plants and other factories.

  • Gold, mining, cement, building materials, transportation, electric power, construction machinery, agricultural machinery, etc.

  • hammer mass

    10kg

    Impact work

    0-5 Joules

    Hammer free fall height

    0-50mm

    Number of impacts

    50.100.150.200 times/min

    Abrasive flow

    0-50kg/hr

    Upper sample

    Round: ¢ 11.28 x 40mm

    Square: 10 x 10 x 40mm

    Round rolling: ¢ 30 × 10mm, ¢ 10 × 30mm

    Next sample: ¢ 50mm

    Random Spare

    Host

    One

    Control cabinet

    One

    Special sand hopper

    One

    Sieve

    (26 mesh, 14 mesh one each)

    Sample fixture

     

    Garden sample sample rod one.

    A round roll test sample rod.

    One 90 ° flat sample fixture

    One 30 ° flat sample fixture

    One tip test fixture

    One eccentric φ30

    One cam φ35

    One special gauge

    Two rubber pads

    Pulley (one for φ62.5,φ106.5 and φ156.5 respectively)

    Tools

    Screwdriver (75 x 5,50 x 5, one each)

    Double-ended wrench (one each for 17 × 19,12 × 14,10 × 8,30 × 27)

    Note:

    1. The specifications in the table are standard models, and the special requirements in the specifications shall be negotiated separately;

    2. The speed in the table is approximate reference value;

    3. The manufacturer reserves the right to modify the parameters of the table column. If there is any change, no further notice will be given.

  • File Download

This testing machine is a testing machine with multi-function and can simulate various working conditions. It can be used for the wear resistance test of metal materials and various dry and (wet) abrasives under impact load or no impact load, contact or no contact, sliding or rolling friction. Through the test, it can be quantitatively measured. The wear caused by different loads and different interactions of metal materials and the wear mechanism can be tested and studied. This testing machine can be used for scientific research institutions such as metallurgy, mining, cement, building materials, transportation, electric power, construction machinery, agricultural machinery, colleges and universities and design departments to study the wear and wear mechanism of metal materials, reasonably select metal materials, and at the same time It can also meet the needs of laboratory production inspection in machinery manufacturing plants, metallurgical repair plants and other factories.

Online Inquiry

Related Products

Free consultation professional answer
Leave your contact information and we will contact you as soon as possible for free professional answers.

Submit Message
Customer Service