undefined
+
  • undefined

YRD-100A tripod drive shaft balancing machine

YRD-100A type three pendulum frame transmission shaft balancing machine is a hard support structure, with three-sided measurement and double-sided measurement of the dual function of the transmission shaft special balancing machine. Especially in the three-sided measurement, the three correction surface data are displayed at the same time, eliminating the cumbersome operation of replacing each swing frame sensor back and forth. Suitable for drive shaft manufacturers and auto repair industry.

Key words:

YRD-100A tripod drive shaft balancing machine

  • Product Description
  • Scope of application
  • Technical parameters
  • Product Video
  • File Download
    • Commodity name: YRD-100A tripod drive shaft balancing machine

    YRD-100A type three pendulum frame transmission shaft balancing machine is a hard support structure, with three-sided measurement and double-sided measurement of the dual function of the transmission shaft special balancing machine. Especially in the three-sided measurement, the three correction surface data are displayed at the same time, eliminating the cumbersome operation of replacing each swing frame sensor back and forth. Suitable for drive shaft manufacturers and auto repair industry.

    YRD-100A type three pendulum frame transmission shaft balancing machine is a hard support structure, with three-sided measurement and double-sided measurement of the dual function of the transmission shaft special balancing machine. Especially in the three-sided measurement, the three correction surface data are displayed at the same time, eliminating the cumbersome operation of replacing each swing frame sensor back and forth. Suitable for drive shaft manufacturers and auto repair industry.

    At present, in the drive shaft manufacturing and maintenance industry, the use of dynamic balance measurement equipment is mostly double-sided measurement soft support balancing machine (that is, only a single drive shaft for double-sided measurement). However, with the development of the automobile industry, especially large passenger cars, heavy trucks and other widely used is the double drive shaft, for this type of drive shaft, with only double-sided measurement function of the balance machine (such as RDB-30, RDB-100 type) will be very inconvenient in operation, and even can not apply the requirements of high precision, because it is not suitable to eliminate the imbalance error caused by the connection of two drive shafts. The YRD-100A type three pendulum frame transmission shaft balancing machine, users can according to their own process requirements, the decision of three or two-sided measurement. When selecting double-sided, the single drive shaft can be balanced on both sides; when selecting three sides, the double drive shaft can be balanced on three sides to eliminate the imbalance error caused by the connection of the double drive shaft. To meet the balance requirements of different users, different models and different precision transmission shafts. Therefore, it has won the trust of car manufacturers, repair shops and drivers.

    The machine supporting electrical measurement system for the ZL-2 type industrial control dynamic balance system. The hardware of the system consists of USB data acquisition card and industrial control computer/all-in-one machine, which has strong stability and anti-interference ability. The software part introduces the virtual instrument technology from the United States, which is LabVIEW written by NI company. The test software is more humane, can adapt to different levels and different occasions a variety of needs, while the software system functions can be greatly expanded, according to the user to specify its functions and characteristics.

  • Joint calibration of multi-section drive shaft

  • Workpiece quality range

    5-100kg

    Maximum length of workpiece

    2800mm

    Sensitivity

    ≥1-5 g/cm

    Maximum initial unbalance of workpiece

    ≤ 1500g · cm

    Balance speed

    800、1200、1600、2400r/min

    Accuracy

    Using a single shaft with a weight of 5kg as a test rotor

    a. Minimum reachable residual unbalance emar 2g.cm

    B, phase angle error ≤ 15 when adding 20g.cm

    Use 16kg double drive shaft as inspection rotor

    a. Minimum residual unbalance emar 10g.cm

    B, phase angle error ≤ 15 when adding sensitivity 100g.cm

     

    Note: check the rotor limit

    1. The rotating speed of 2400rpm is only used for workpieces ≤ 10kg

    2. The rotating speed of 800rpm is used for the balance of workpieces ≤ 100kg and the initial balance with large initial unbalance

YRD-100A type three pendulum frame transmission shaft balancing machine is a hard support structure, with three-sided measurement and double-sided measurement of the dual function of the transmission shaft special balancing machine. Especially in the three-sided measurement, the three correction surface data are displayed at the same time, eliminating the cumbersome operation of replacing each swing frame sensor back and forth. Suitable for drive shaft manufacturers and auto repair industry.

At present, in the drive shaft manufacturing and maintenance industry, the use of dynamic balance measurement equipment is mostly double-sided measurement soft support balancing machine (that is, only a single drive shaft for double-sided measurement). However, with the development of the automobile industry, especially large passenger cars, heavy trucks and other widely used is the double drive shaft, for this type of drive shaft, with only double-sided measurement function of the balance machine (such as RDB-30, RDB-100 type) will be very inconvenient in operation, and even can not apply the requirements of high precision, because it is not suitable to eliminate the imbalance error caused by the connection of two drive shafts. The YRD-100A type three pendulum frame transmission shaft balancing machine, users can according to their own process requirements, the decision of three or two-sided measurement. When selecting double-sided, the single drive shaft can be balanced on both sides; when selecting three sides, the double drive shaft can be balanced on three sides to eliminate the imbalance error caused by the connection of the double drive shaft. To meet the balance requirements of different users, different models and different precision transmission shafts. Therefore, it has won the trust of car manufacturers, repair shops and drivers.

The machine supporting electrical measurement system for the ZL-2 type industrial control dynamic balance system. The hardware of the system consists of USB data acquisition card and industrial control computer/all-in-one machine, which has strong stability and anti-interference ability. The software part introduces the virtual instrument technology from the United States, which is LabVIEW written by NI company. The test software is more humane, can adapt to different levels and different occasions a variety of needs, while the software system functions can be greatly expanded, according to the user to specify its functions and characteristics.

Online Inquiry

Related Products

Free consultation professional answer
Leave your contact information and we will contact you as soon as possible for free professional answers.

Submit Message
Customer Service